Genuine Accessories

Home/Genuine Accessories

The complete range of accessories and tools required for the use of vitrified clay products in all sewer construction applications.

  • The A-Ring is used to connect vitrified clay pipe spigots to the end of other pipe systems like PVC or Cast-Iron pipes. It's available in DN 100 to 200 mm only.
  • This ring used as a sealing ring when the existing main pipe is drilled with hole to provide for a branch or house connection from existing main line. It's available in DN 150 to 200 mm only.
  • The collar seal is used to connect two spigot ends when replacing a pipe with a junction or when replacing pipes. The collar seal is available in nominal sizes DN 200 to 600mm for pipes of both Standard (SS/B) and Extra Strength (ES/A). The collar seal can be used with all pipes whose external diameters fall within the tolerance range.
  • The P-ring is used as a spigot end seal for cut-off pipes and fittings for "K" Joint systems. The P-Ring is available in sizes DN 200 to 600mm for pipes of both Standard (SS/B) and Extra Strength (ES/A).
  • The U-Ring is used to connect vitrified clay pipe sockets to the spigot end of other pipe systems like PVC or Cast-Iron pipes. It's available in DN 100 to 200 mm only.
  • These gauges used to test the pipe lines by air at the site.
  • Type-1: This type is used for connection of vitrified clay pipe with uPVC pipe, spigot-spigot with different outside diameters. It's available in DN 100 to 300 mm only. Type-2: This type is used for connection of vitrified clay pipe with different outside diameters. It's available in DN 200 to 600 mm only.
  • These Ball Test stoppers have the similar function as of mechanical stoppers to test the pipeline by pressure of water or air. They are also used to detect any defects inside the pipeline after the back-fill completion. It's available in all sizes from 100 mm till 600 mm.
  • This chain used to cut vitrified clay pipes up to DN 400 mm at site.
  • This cutting machines is used to cut the pipes greater than DN 400 pipes.
  • The use of this type rings to cut the pipes at any required length considered the simplest and quickest way for DN 100 to 150 mm.
  • The mechanical test stoppers are used to plug the ends of the pipeline in order to perform tests by pressure of water or air. These stoppers are available in different variable sizes from DN 100 to 600 mm).