Note: The standard length of pipe (L1) tolerance range is -1% + 4%. CPC standard Vitrified Pipes & fittings are glazed internally and externally for use in town and industrial drainage in 2 meters long (DN 200 SS available in 1.75 meters long), with joint (K) in accordance with Jointing system (C).
-
Pipes with joint "K" according to jointing System "C" (GSO EN295-1:2008).
Note: The standard length of pipe (L1) tolerance range is -1% + 4%.
-
Flexible joints and connectors for Manholes.
Note: The other special lengths are available upon request. -
Bends with joint "K" according to jointing System "C", Class (ES/A).
Note: Bends for different degrees other than the above list can be produced upon request. -
Note: Bends for different degrees other than the above list can be produced upon request. -
Back Drop Junction 90 ˚ (T-Back Drop Junctions). Note: The back-drop junctions (Y or T) from DN to DN are available according to main pipes range and only product upon.
-
Back Drop Junctions are needed when connection between lines of different elevations is required. Back Drop connections can be constructed either by using a regular 45° (Y) or 90° (T) junction in connection with an (M-seal) or by using a tumbling bay junction as shown below. CPC Back vitrified clay back drop connections are available in different sizes from DN 150 mm to DN 600 mm in both classes SS and ES series.
-
Back Drop Junctions with joint "K" according to jointing System "C".
-
Note: The other DN to DN junction's other than the above list can be produced upon request within the main pipes range. -
Junctions 45 ˚(Y-Junctions).
Note: The other DN to DN junction's other than the above list can be produced upon request within the main pipes range. -
Junctions 90 ˚ (T-Junctions).
-
Junctions 90 ˚ (T-Junctions).
